Larger Photo
Larger Photo
|
|
Description: This is a Construx starter set that enables a child to build spaceships and other structures. Designed for children ages 5 years and older.
|
Accessories: Small set (less than 60 pieces) including, but not limited to the following:
- 1 each - FPT16580 - #562 Spacecraft instruction/idea booklet.
- Connector beams:
- 1 each - FPT6502 - Grey 2" long straight connector beams (measures 2" long, 1/2" wide, 1/2" deep).
- 3 each - FPT6503 - Grey short straight connector beams (measures 1/2" long, 1/2" wide, 1/2" deep).
- 4 each - FPT16565 - Grey angled connector beams (measures 3-1/2" long, 1/2" wide, 1/2" deep).
- 4 each - FPT6561 - Flat blue connector beam with a hook on each end. The beam has a "Fisher-Price" imprint on the side (measures 3-3/4" long, 1/2" wide).
- Connector Nuts:
- 11 each - FPT6504 - Blue 6-peg connector nuts (measures 3/4" long, 3/4" high, 3/4" deep).
- 7 each - FPT6447 - Black 4-peg jointed connector nuts (measures 3/4" long, 3/4" high, 3/4" deep).
- 1 each - FPT16640 - Grey rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "L" imprint for left side (measures 1-5/8" long, 1" tall, 3/4" wide).
- 1 each - FPT6486 - Grey rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "R" imprint for right side (measures 1-5/8" long, 1" tall, 3/4" wide).
- 1 each - FPT16570 - Square green cockpit seat with a slightly raised "backrest" on the top edge and molded gadgets and handles molded on the top edge of 2 sides. The "seat" is square inside with a connector hole in the center of the bottom. The bottom of the cockpit has an imprint marked "©1983 Fisher-Price Toys Division The Quaker Oats Co. Made in USA". (measures 2" deep, 2" wide, 1-1/2" tall).
- Construx figure(s) - detachable figure including:
- FPT16581 - White "body" with a chest, a round peg on top to connect a hear, and 2 round pegs on the sides to connect arms. The bottom has a white section that swivels to connect legs to.
- FPT16582 - Left white arm. The arm has a rounded shoulder and a squared fist on the end. The arm has a recessed connector hole by the shoulder and on the end of the hand. The arm is marked "L" for left.
- FPT16583 - Right white arm. The arm has a rounded shoulder and a squared fist on the end. The arm has a recessed connector hole by the shoulder and on the end of the hand. The arm is marked "R" for right.
- FPT16584 - 2 white legs with 2 white shoes on the bottom all molded together. The top of the legs has a rectangular hold in the center with a round "bar" that connects the top of the left leg to the top of the right leg.
- FPT16585 - Silver space helmet that has an opening for a face to show through. The inside of the helmet has an oval-shaped circle with 4 pegs on the outsides to snap onto a head piece.
- FPT16579 - Caucasian head/face with brown eyes and eyebrows. The top of the head is flat with a slightly raised oval-shape on the top to connect hair or hat pieces.
|
|
Variations: None.
|
Other Information:
- This set was sold in a 4-7/8" long, 7-1/16" high, 2" deep box.
- This set was also sold in #560 Vehicles Assortment, click to see the other sets in this series.
|
| Please, if you have any information or details about this toy that isn't mentioned above then e-mail us. Thanks! |
|
E-Mail us: 
