Larger Photo
|
|
Description: This is a 25-piece Construx Alien Series trial set that includes black beams, silver jet pods, aerials, ski and machine guns, and more! Designed for children ages 5 years and older.
|
Accessories: 25 Construx pieces including, but not limited to the following:
- 1 each - FPT16651 - #6015 Construx Alien Series "Invader" instruction/idea booklet.
- Connector beams:
- unknown number each - FPT6516 - Black angled connector beam (measures 3-1/2" long, 1/2" wide, 1/2" deep).
- unknown number each - FPT6517 - Black 2" long straight connector beam (measures 2" long, 1/2" wide, 1/2" deep).
- unknown number each - FPT6518 - Black short straight connector beam (measures 1/2" long, 1/2" wide, 1/2" deep).
- Connector Nuts:
- unknown number each - FPT6519 - Dark grey 6-peg connector nuts (measures 3/4" long, 3/4" high, 3/4" deep).
- Weapons:
- 2 each - FPT16650 - Silver lazar guns with a long gun in the center and 2 shorter guns on the sides. The shorter guns are rised a bit higher than the center gun. There are 4 round silver beams around the base of the lazar guns.
- unknown number each - FPT6505 - Black single c-clamp with a square connector that has a rounded C-shape on the side (measures 1" long, 1/2" tall, 1/2" wide).
- 2 each - FPT16649 - Black landing gear with 2 skis (approx. 2" long).
- 2 each - FPT6472 - Black 3-shaft plane nose/antenna (measures 3-3/8" long, 53/8" wide).
- 1 each - FPT16634 - Silver rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "L" imprint for left side (measures 1-5/8" long, 1" tall, 3/4" wide).
- 1 each - FPT16633 - Silver rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "R" imprint for right side (measures 1-5/8" long, 1" tall, 3/4" wide).
- 1 each - FPT6460 - Black rectangular cockpit seat with a ribbed backrest that is raised above the side edges of the cockpit. The seat area is recessed with molded controls and gears on the inside sides. There is a connector hole on the bottom of the cockpit, one on each side of the cockpit, and three on the front and back. Measures 3" long, 1-7/8" wide, 1-3/4" tall.
- 1 each - FPT16652 - Purple rectangular semi-transparent cockpit canopy. The canopy has an opening in the top to allow a Construx figure to fit through. Measures 2-7/8" long, 1-3/4" wide, 5/8" tall.
|
|
Variations: None.
|
|
Other Information:
|
| Please, if you have any information or details about this toy that isn't mentioned above then e-mail us. Thanks! |
|
E-Mail us: 
