#6011 Imagination Series "Rocket Coupe" and Alien Series "Celestrial Avenger"

Fisher-Price
Featured Toy

Email us

#6011

Imagination Series "Rocket Coupe" & Alien Series "Celestrial Avenger"

Years Made:

Fisher-Price Toy Department
Department 7: Playsets

1987-19??

Aisle F: Construx

Larger Photo

Description: This is a Construx combo pack set which includes two different sets from the Construx Series for the price of one! This set includes pieces from the Imagination Series, and pieces from the Alien Series all in one box. This set was designed for children ages 5 years and older.

Accessories:

FPT6512 - #6011 Imagination Series "Rocket Coupe" and Alien Series "Celestrial Avenger" instruction/idea booklet.
Alien Series Pieces:
- Panels:
  - FPT6513 - 4 each - Flat black square panel with one corner cut off at an angle (measures 2" long, 2" wide).
  - FPT6587 - Large black triangular panel. The back side has a "L" imprint for left. Measures 4-3/4" long, 2-1/4" wide, 1/2" thick.
  - FPT6588 - Large black triangular panel. The back side has a "R" imprint for right. Measures 4-3/4" long, 2-1/4" wide, 1/2" thick.
- Connector beams:
  - FPT6516 - 4 each - Black angled connector beam (measures 3-1/2" long, 1/2" wide, 1/2" deep).
  - FPT6517 - 11 each - Black 2" long straight connector beams (measures 2" long, 1/2" wide, 1/2" deep)
  - FPT6518 - 5 each - Black short straight connector beams (measures 1/2" long, 1/2" wide, 1/2" deep)
- Connector Nuts:
  - FPT6519 - 18 each - Grey 6-peg connector nut (measures 3/4" long, 3/4" high, 3/4" deep).
- FPT6520 - #6011 Decal Sheet ID# 474772.
- FPT6521 - Black large cylinder (measures 2-1/2" long, 2" diameter). One end of the cylinder is closed with a molded recessed plus (+) shape and a hole in the center. The other end is open with a jagged edge.
- FPT16268 - 4 each - White Glow-In-The-Dark half-circle disk (measures 2" diameter, 1" tall). The disk has a hole in the top, and the edge of the disk has 4 sides with 2 oblong holes.
- FPT16269 - 4 each - Glow-in-the-dark small straight rod (used as lazar guns, radar centers, etc.) The rod measures 2-3/4" long. The side of one end of the rod has a small recessed square hole. The opposite side of the rod has a small triangular recessed groove that stretches from one end of the rod to the other end.
- FPT16270 - 7 each - White Glow-In-The-Dark tiny cylinder (Measures 1/2" long, 3/8" diameter). The cylinder is hollow inside.
- FPT16634 - Silver rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "L" imprint for left side (measures 1-5/8" long, 1" tall, 3/4" wide).
- FPT16633 - Silver rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "R" imprint for right side (measures 1-5/8" long, 1" tall, 3/4" wide).
- FPT6526 - Long black cockpit (measures 6" long, 1-7/8" wide, 2" tall). The top of the cockpit has a recessed seat. The back of the cockpit has a recessed circle with a curved lip on the top and bottom. The top lip has a raised round knob on top, and the bottom lip has a raised round knob on bottom. The center of the circle has a large odd-shaped hole with 2 small holes on the sides. The front of the cockpit has an upside-down U-shaped receiver hole.
- FPT6527 - Long clear plastic purple-tinted cockpit canopy (measures 5" long, 1-7/8" wide, 1-5/8" tall). The canopy is triangular shaped.
Imagination Series Pieces:
- Panels:
  - FPT16632 - Transparent green-tinted angled panel (measures 3-1/2" long, 2" wide).
- Connector beams:
  - FPT6502 - 10 each - Grey 2" long straight connector beam (measures 2" long, 1/2" wide, 1/2" deep).
  - FPT6503 - 9 each - Grey short straight connector beam (measures 1/2" long, 1/2" wide, 1/2" deep).
  - FPT16565 - 2 each - Grey angled connector beam (measures 3-1/2" long, 1/2" wide, 1/2" deep).
  - FPT16628 - Grey 5-1/4" long left curved beam. The beam is slightly curved with a sharp curve on the left side. Both ends of the beam have a connector hole in the end. The inside of the beam has a "Fisher-Price" imprint and a "L" imprint for "Left" side.
  - FPT16629 - Grey 5-1/4" long right curved beam. The beam is slightly curved with a sharp curve on the right side. Both ends of the beam have a connector hole in the end. The inside of the beam has a "Fisher-Price" imprint and a "R" imprint for "Right" side.
- Connector Nuts:
  - FPT6504 - 18 each - Blue 6-peg connector nut (measures 3/4" long, 3/4" high, 3/4" deep).
  - FPT6482 - 2 each - Green diamond-shaped 4-peg connector nut with a hole in the center of the diamond (measures 1-1/8" long, 1/2" wide, 5/8" deep).
  - FPT16567 - 4 each - Yellow round pulleys/wheels with a connector molded onto one side (measures 15/16", diameter, 9/16" high).
- FPT6536 - Decal sheet ID# 474781.
- FPT6487 - 4 each - Black rubber tires that attach to the connector pulleys that double as wheels (measures 1-3/4" diameter, 3/8" thick).
- FPT16622 - 2 each - Red large cylinder (measures 2-1/2" long, 2" diameter). One end of the cylinder is closed with a molded recessed plus (+) shape and a hole in the center. The other end is open with a jagged edge.
- FPT16630 - Black half-circle disk (measures 2" diameter, 1" tall). The disk has a hole in the top, and the edge of the disk has 4 sides with 2 oblong holes.
- FPT16572 - 3 each - Tiny yellow cylinders (Measures 1/2" long, 3/8" diameter).
- FPT16634 - Silver rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "L" imprint for left side (measures 1-5/8" long, 1" tall, 3/4" wide).
- FPT16633 - Silver rounded jet pod engine with a rounded body and a rounded exhaust on the back and a square connector piece on the bottom. One side of the body has a rectangular opening that shows the hollow inside of the body. Inside the body has a "R" imprint for right side (measures 1-5/8" long, 1" tall, 3/4" wide).
- FPT16631 - 4 each - Small round yellow pully (measures 15/16" diameter, 3/8" thick). The disk has a hole in the center and a slit on the side from the center hole to the outeredge.
- FPT16570 - Square green cockpit seat with a slightly raised "backrest" on the top edge and molded gadgets and handles molded on the top edge of 2 sides. The "seat" is square inside with a connector hole in the center of the bottom. The bottom of the cockpit has an imprint marked "©1983 Fisher-Price Toys Division The Quaker Oats Co. Made in USA". (measures 2" deep, 2" wide, 1-1/2" tall).