Larger Photo
Larger Photo
Larger Photo
Larger Photo
Larger Photo
Larger Photo
Larger Photo
Larger Photo
|
Description: This is a model kit of a red "Hot Stuff" hot rod dragster that has a lift up body with support bars, rubber tires, and spoilers. The kit is designed to be easy to build, and tough enough to play with when the model is finished. The kit comes with easy screw-tight parts that require no glue, pre-colored plastic pieces and stick-on decals that requires no messy paint nor gloss. Designed for children ages 5 to 9 years old.
|
Accessories:
- FPT5872 - Red plastic drag-racing "Funny Car" body frame. The frame has a hole in the hood for the blower unit, a large windshield hole, and two window holes on the sides. The front of the car frame has rounded areas over the front wheels. Measures 11-1/2" long, 4-1/8" wide, 3" tall.
- FPT5840 - Red upper car frame (chassis - car base). WFL: 07-AK-01-6-O.
- FPT5841 - Red lower car frame (chassis - car base). WFL: 07-AK-01-6-P.
- FPT5873 - Engine, tranny, and wide black rear rubber tires. The tires are marked "Fisher-Price" on the side.
- FPT5874 - Front axle with two black front tires on the ends.
- FPT5852 - Black front bumper (straight, not curved like a normal car bumper). WFL: 07-AI-03-4-G.
- FPT5844 - Black H-shaped body lift bar (resembles a 4-rung ladder) that fits between the car frame and the car chassis (to allow access to the car's motor). Measures 6" long x 1-1/4" wide.
- FPT5845 - White fuel tank. WFL: 07-AI-03-4-H.
- FPT5846 - Black car seat. WFL: 07-AI-03-4-I.
- FPT5847 - Black car dash with a black steering wheel. WFL: 07-AI-03-4-J.
- FPT5845 - Crome blower.
- FPT5850 - Black left-side exhaust pipes. WFL: 07-AI-03-4-M.
- FPT5851 - Black right-side exhaust pipes. WFL: 07-AI-03-4-N.
- FPT8159 - Black pulleys/belts.
- FPT8160 - White hubcaps.
- FPT5853 - Screws. WFL: 07-AI-03-4-O.
- FPT1302 - Screw key.
- FPT5877 - Decal sheet with decals of various designs that get applied to the funny car dragster body. Measures 9" long x 7-1/2" wide.
- FPT1678 - Assembly instructions for the #528 Ford EXP "Hot Stuff" model kit. Measures 11" x 17".
|
Variations:
- FPT20271 - Assembled #528 Ford EXP "Hot Stuff" dragster model kit. The car has a red plastic drag-racing "Funny Car" body frame. The frame has a hole in the hood for the blower unit, yellow and white racing stripes, and marked "Hot Stuff" on the side. Has a white internal friction motor unit, large rear rubber tires marked "Fisher-Price" and with white wheels, has a white/grey/crome engine unit, black "header" exhaust pipes, and a black front bumper. The engine is wound by rolling the car backwards, then once released, the car will do a wheelie and roll forward. WFL: 07-AF-23-2-C
- FPT5876 - Assembled car frame for the dragster model kit.
|
Other Information:
|
Please, if you have any information or details about this toy that isn't mentioned above then e-mail us. Thanks!
|
|